[Mm-friends] Fwd: [HIMS-News] Announcing Braille EDGE firmware v1.1.

Chase Crispin chase.crispin at gmail.com
Wed Aug 14 17:54:00 EDT 2013



Chase Crispin
Sent from my iPhone 

Begin forwarded message:

> From: "Jenny Axler" <jenny at hims-inc.com>
> Date: August 14, 2013, 2:49:20 PM CDT
> To: <hims-news at googlegroups.com>
> Subject: [HIMS-News] Announcing Braille EDGE firmware v1.1.
> Reply-To: hims-news at googlegroups.com
> 
> HIMS is pleased to announce the release of Braille EDGE version 1.1
>  
> Braille EDGE continues to offer the blind and visually impaired so much more than a Braille display with firmware v1.1, including the ability to read RTF, DOC, and DOCX files as well as the addition of our unique Terminal Clipboard. With v1.1, Braille EDGE is more global than ever with the addition of several language tables including Danish, Turkish and Hebrew, expanding the number of language offerings to 17. Reading and editing documents is now even more intuitive for the Braille user with v1.1 as you can now read and edit TXT, RTF, DOC and DOCX files in grade 2 Braille.
> For further details, please see the complete list of changes below.
>  
> Changes for Braille EDGE v1.1
>  
> 1.    Changed Reset and Power on/off sequences
> A.      To power the Braille EDGE on/off, press and hold the “Power” button for 1 second.
> B.      To soft reset the Braille EDGE, press and release the Reset button.
> C.       To hard reset the Braille EDGE, Use a sharp object to press the button inside the pinhole toward the right end of the rear panel. When the Braille display pins are in their “Off” position, press and hold the Power button until the pins retract.
>  
> NOTE: Powering the unit on and off no longer results in the loss of settings, thus there is no more need for separate Power and Sleep Mode sequences.
>  
> 2.    Support reading of DOC, DOCX and RTF files
> A.      You can now use the built-in “Notepad” to create and edit Braille and text documents, as well as read BRF, RTF, DOC or DOCX files.
> B.      While you cannot save an RTF, DOC, or DOCX file, you may edit the text and save your document as a TXT file using the “Save As” function in the Notepad's “File” menu.
>  
> 3.   Support for reading text documents in contracted Braille
> A.      You can now read and edit TXT, DOC, DOCX and RTF documents in contracted grade 2 Braille.
> B.      Choose your preferred document grade using the “Set Notepad grade” option in the Braille EDGE “Options” menu.
>  
> 4.    Additional languages supported
> A.      Added support for Danish, Turkish and Hebrew tables.
> B.      Braille EDGE now supports 17 languages: Arabic, Danish, Dutch, French, German, Hebrew, Italian, Japanese, Korean, Norwegian, Polish, Russian, Spanish, Swedish, Turkish, UK English and US English.
>  
> 5.    Added Terminal Clipboard Function
> A.      When in the “Terminal for Screen Reader”, use “Space-enter-I” to activate the Terminal Clipboard.
> B.      The Terminal Clipboard allows you to type and edit text using the Braille EDGE, then press “Enter” to send it as a block to the connected computer, phone or tablet. This is useful when using a screen reader like VoiceOver which translates as you type, sometimes creating unintended text.
>  
>  
> 6.    Additions to Options
> A.      Inserted option to “Automatically disconnect Bluetooth at 10%”. When the power level drops to 10% while using Braille EDGE with a screen reader via Bluetooth, it disconnects automatically and produces a low battery alarm message. This is to prevent complete discharge of the battery and loss of Bluetooth pairing information.
> B.      Removed the “Backup” option as all options are now saved automatically.
> C.       Inserted "Set Notepad Grade" option as described above.
>  
>  
> ** Use the following steps to update the Braille EDGE 40:
>  
> 1)      Download the firmware from the following link:
> http://www.himsintl.com/Upgrade/B40K/BrailleEDGE40_130809.zip
> 2) Extract the zip file. The zip file  should contain 1 file with a .bin extension
> 3) Copy the .bin file to the root “the top-most directory" of an SD card
> 4) Connect the SD card to the Braille EDGE and connect the Braille EDGE to AC power
> 5) Press and hold the F8 key
> 6) While holding F8, press and release “Reset”
> 7) Continue to hold F8 until the unit announces “Start System Update”
> 8) The unit will update and reboot. Please check the “Information” to ensure you’re running software v1.1
>  
> Please find the Braille EDGE user manual attached. In addition to containing updates to reflect the new features, the manual now  contains installation instructions and key references for most  of the supported screen readers.
> If you have questions or problems, please contact technical support at 512-837-2000 or via e-mail at support at hims-inc.com
>  
> -- 
> You received this message because you are subscribed to the Google Groups "HIMS-News" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to hims-news+unsubscribe at googlegroups.com.
> For more options, visit https://groups.google.com/groups/opt_out.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://acbradio.org/pipermail/mm-friends/attachments/20130814/933920a1/attachment-0002.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: Braille EDGE 40 manual.doc
Type: application/msword
Size: 342528 bytes
Desc: not available
URL: <http://acbradio.org/pipermail/mm-friends/attachments/20130814/933920a1/attachment-0001.doc>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://acbradio.org/pipermail/mm-friends/attachments/20130814/933920a1/attachment-0003.html>


More information about the Mm-friends mailing list